How to remove the NEXUS STRANGER Ver.2 chassis
About the Chassis
The NEXUS STRANGER is equipped with a chassis in both the top and bottom sections, which can be powered on independently.
Disassembly methods vary depending on the production period.
- Ver.2 models have five screws at the bottom (pommel) of the top hilt.
- Ver.1 models have no screws.
For instructions on how to disassemble the Ver.1, please refer to the page below.
How to Remove the NEXUS STRANGER Chassis (Ver.1)
Top Hilt
The chassis can be removed by unscrewing the five screws located on the pommel. These are special screws. Please use the included wrench.
Remove the five screws on the pommel using the included wrench. (As these are special screws, please be sure to use the provided tool.)
Remove the chassis from the pommel side.
Charging can be performed via the Type-C port or by removing the battery.
There is a specific orientation for inserting the chassis. Align the grooves on the hilt with the chassis when inserting.
Bottom Hilt
The chassis in the bottom section can be removed by unscrewing the pommel part.
No screws need to be removed, allowing for smooth removal and charging.
Remove the pommel part and take out the chassis.
There is a specific orientation for inserting the chassis. Align the grooves on the hilt with the chassis when inserting.
Similar to the top section, charging can be performed via the Type-C port or by removing the battery.