Crystal Focus™ v10 (CFX) Operation Manual
*This page is a beta version of the manual guide.
Target firmware: CFX 10.000B
Introduction
Please read the page regarding important notes before use.
Notes on Notation and Motion
- ACT: Activation button
- AUX: Auxiliary button
- Click: Press the button and release immediately.
- Hold: Press and hold the button.
- Twist: Rotate the hilt approximately 90 degrees in either direction and return it to its original position.
Operation Manual
| Item | Description | Method |
|---|---|---|
| Wake from Sleep | Wakes from sleep mode. | Hold ACT while powered off |
| ON | Activates the saber. | Click ACT while powered off |
| OFF | Blade retracts and the saber shuts down. | Hold ACT while activated |
| Motion ON/OFF | Allows ON/OFF operation without using buttons. Not active in sleep mode. | Twist while powered off or activated |
| Blaster | Triggers blaster effect. | Click AUX while activated |
| Lockup | Triggers lockup effect. | Hold AUX while activated |
| Force Effect | Triggers force effect. | Click AUX while swinging |
| Mute ON | Activates in mute mode after hearing the voice prompt "Mute". | Hold AUX while powered off, then immediately click ACT to activate. |
| BGM Play/Stop | Plays the BGM configured (saved) for each font. Does not trigger if the font does not have BGM. | Double-click ACT regardless of power status* *Playing again while BGM is active will stop the BGM. |
| Change BGM | Changes to a different BGM and starts playback (only for fonts with multiple BGM files). | Long-press ACT while powered off |
| Menu Mode | Enters menu mode. In menu mode, it cycles through Font #1 to Font #<N>, Audio Player, SD/USB Access, System Menu, and EXIT. | Hold AUX while powered off until the "Sound Select" voice plays. |
| ┗Font Menu | Cycles from Font #1 to Font #<N>. | Click ACT (previous) or AUX (next) to select a font. Hold AUX or ACT on the desired font to confirm. |
| ┗Audio Player | Plays BGM stored in the Tracks folder. | Hold AUX or ACT to confirm. |
| ┗SD/USB Access | Not normally used, as state transition is difficult to determine without an OLED screen. | Not used. |
| ┗System Menu | Allows modification of various settings. | Hold AUX or ACT to confirm. |
| ┗Volume | Adjusts volume for each system (saber volume, beep, menu sound). | Hold AUX or ACT to confirm. Click ACT to decrease volume, AUX to increase volume, and long-press the button to confirm. |
| ┗Blade Power | Adjusts blade brightness; 100% is the default. | Not used. |
| ┗Blade Length | Adjusts the number of LEDs for the blade. | Not used. |
| ┗Color Profile | Not normally used, as state transition is difficult to determine without an OLED screen. | Not used. |
| ┗Previous Menu | Returns to the system menu upon confirmation. | Hold AUX or ACT to confirm. |
| Color Change Mode | Allows you to change the blade color. | Press AUX and ACT simultaneously while activated |
| ┗Color Change | Changes the blade color. | Move the hilt slowly while in the mode. |
| ┗Confirm Color | Confirms the blade color. | Click ACT or AUX while in the mode |
| Effect Change Mode | Allows you to change the blade effect. | Hold either ACT or AUX while in Color Change Mode until you hear "Blade Profile". |
| ┗Effect Change | Changes the effect. | Move the hilt slowly while in the mode. |
| ┗Confirm Effect | Confirms the blade effect. | Click ACT or AUX while in the mode |
| Battery Check Mode | Blue light appears at a specific position on the blade. If it lights up to the tip, battery is high; if near the base, battery is low. | Click AUX while powered off with the blade attached. |
| Sleep Mode | Enters sleep (power saving) mode. | Automatically transitions after a certain period of being powered off. |
ACT: Activation switch, AUX: Auxiliary switch
Reference Links
Plecter Labs - Electronics for Props that WORKS !
・・・Developer of Crystal Focus™ v10 (CFX). Official documentation and firmware are available here.
・・・A site detailing the customization of Crystal Focus™ v10 (CFX).