SYBER SABERS
ELF-Sabers AS3 V2 Master Chassis
ELF-Sabers AS3 V2 Master Chassis
Couldn't load pickup availability
This model is an ELF SABERS Anakin EP3 model AS3V2 with a crystal chamber model installed.
This is a high-end chassis equipped with a plasma gate and a rotating crystal chamber.
*This product requires installation. Please refer to the following for installation requests.
Installing a Custom Lightsaber
The plastic parts of the chassis are painted to look like metal, and where metal is available, they are made of brass. The brass parts are weathered with a black dye, creating a sophisticated design.
It is equipped with a rotating crystal chamber and the rotation speed is adjusted to around 150 RPM.
By coordinating the activation and rotation of the blade, the rotation is controlled in a way that simulates the transfer of energy from the crystal through the plasma gate to the blade.
■Product specifications
| Hilt | ELF SABERS AS3V2 |
| LED lighting method | Neopixel method |
| Button specifications | 2 buttons |
| Button part | Clamp card part top and bottom |
| Mounting board | Proffieboard 2.2 |
| Built-in speaker | 28mm 4Ω 3W speaker |
| Charging method | Removable battery system |
| Battery standards and specifications | 18650 3200mah 10A KEEPPOWER (PSE certified) |
| Blade inches | 7/8 inch |
■Accessories
- Lightsaber body
- Blade plug
- Neopixel Blade
- charger
- Operation manual (PDF)
- Belt Clip Type B
- 89 Sabers saber bag (JEDI)
■Notes, etc.
This is an imported product that we have installed. Please note that there may be minor scratches on the hilt due to the manufacturing process, international shipping, and assembly process.
remarks
remarks
About the Stand
The 89 Sabers Saber Stand requires assembly. Please see below for assembly instructions.
How to assemble the 89Sabers Saber Stand
About the charger
The charger that comes standard with the 89 Sabers installation model may not be compatible with the size of the KEEPPOWER (battery with protection circuit).
We recommend that you also purchase the following:
2A Fast Charger XTAR SC1
Connecting and disconnecting the chassis
Please see below for installation and removal instructions.
Other notes
Other notes
・As all products are made overseas, there may be minor scratches. If you are nervous, we recommend that you avoid purchasing.
・It will be sent in the manufacturer's presentation box, but the box may have damage such as dents and tears during shipping from overseas.
・Chassis design (color) and other accessories may change slightly depending on the season.
Share
