Profileboard Edit Mode

What is Edit Settings Mode?

The ProffieOS-equipped lightsabers sold by our store have "Edit Settings Mode" enabled, which allows you to change the blade length, brightness, and other settings directly from the device.

This menu function allows you to make fine adjustments without using a computer, and detailed adjustments can be made simply by pressing buttons and rotating the hilt. It features a shallow menu structure because the menu items are limited to major settings, reducing the risk of accidental operation.

When the blade is OFF, it starts by holding AUX + PWR (for 1-button models, double-click PWR then hold).

What cannot be done in Edit Settings Mode
This mode is limited to adjusting setting values. It does not include changing blade styles, editing colors, changing fonts, or copying/deleting presets. These require editing the config file on a computer.

Menu Items

After starting, rotating the hilt will read the following 6 items in this order. Click PWR on the desired item to enter that item's adjustment.

Item (Reading Order) Function Description Remarks
① Volume
Volume 		Adjusts the saber's volume —
② Control Settings
Motion Settings 		Adjusts the ON/OFF and values of motion operations such as swing ignition and twist retraction (12 items below) Enters a deeper level
③ Clash Threshold
Clash Sensitivity 		Adjusts the sensitivity at which impacts to the hilt are judged as clashes Increments of 0.25. Lowering the value increases sensitivity
④ Blade Length
Blade Length 		Adjusts the number of LEDs that light up. Used when switching to a shorter blade, etc. For models with multiple blades, you will first select the target blade
⑤ Brightness
Brightness 		Adjusts the brightness of the blade —
⑥ SD Access
SD Access 		Switches the SD card to a state where it can be read and written from a computer. When turned ON, the SD card becomes visible via USB connection Only when the blade is OFF. Switching it will stop the standby sound and standby animation

Items that can be adjusted in Control Settings

  • Swing Ignition: ON/OFF of the function to turn the blade ON with a swing
  • Swing On Speed: The speed of the swing judged as swing ignition
  • Twist Ignition: ON/OFF of the function to turn the blade ON with a twist
  • Thrust Ignition: ON/OFF of the function to turn the blade ON with a thrust
  • Stab Ignition: ON/OFF of the function to turn the blade ON with a stab
  • Force Push: ON/OFF of force push
  • Force Push Length: The length of the movement judged as force push
  • Twist Retraction: ON/OFF of the function to turn the blade OFF with a twist
  • Lockup Delay: The waiting time until judged as a lockup (milliseconds)
  • Clash Detection: The strength of clash detection during battle mode
  • Power Lock: Lock of the PWR button
  • Max Clash: Maximum strength of the clash effect
Caution
If the font does not contain the voice files for the menu, the "Error in Font Directory" warning will sound at startup, and you will not be able to enter the mode. Please try switching to another preset first.
If you change the settings, be sure to confirm with a PWR click. If you go back without confirming, the changes will be discarded.

Operation List (1-Button Model)

Function Item Function Description Operation Method
Start Edit Settings Mode Starts the setting change mode Double-click PWR then hold when the blade is OFF
Item Selection Sends items such as volume, brightness, blade length, and sensitivity in order Rotate the hilt
Next / "Yes" / Increase Value Advances the setting value by one, or selects "Yes" Turn the hilt to the right
Previous / "No" / Decrease Value Reverts the setting value by one, or selects "No" Turn the hilt to the left
Increase Value (+5) Increases the blade length in units of 5 (only during blade length adjustment) Turn the hilt to the right while holding PWR
Decrease Value (-5) Decreases the blade length in units of 5 (only during blade length adjustment) Turn the hilt to the left while holding PWR
Select / Confirm / Save Enters the item, or confirms and saves the changes Click PWR
Back / Cancel Returns to the previous menu, or cancels the changes Long-click AUX
Exit Mode Exits Edit Settings Mode Hold PWR

Operation List (2-Button Model)

Function Item Function Description Operation Method
Start Edit Settings Mode Starts the setting change mode Hold AUX + PWR simultaneously when the blade is OFF
Item Selection Sends items such as volume, brightness, blade length, and sensitivity in order Rotate the hilt
Next / "Yes" / Increase Value Advances the setting value by one, or selects "Yes" Turn the hilt to the right
Previous / "No" / Decrease Value Reverts the setting value by one, or selects "No" Turn the hilt to the left
Increase Value (+5) Increases the blade length in units of 5 (only during blade length adjustment) Turn the hilt to the right while holding PWR
Decrease Value (-5) Decreases the blade length in units of 5 (only during blade length adjustment) Turn the hilt to the left while holding PWR
Select / Confirm / Save Enters the item, or confirms and saves the changes Click PWR
Back / Cancel Returns to the previous menu, or cancels the changes Click AUX
Exit Mode Exits Edit Settings Mode Hold AUX

Other Information

The contents of this page are based on the standard settings at the time of shipping from our store (ProffieOS 8.x / FETT263 prop).
Last Updated: October 11, 2026